How Do Drone Geophysical Surveys Reduce the Environmental Footprint of Mineral Exploration?

Drone geophysical surveys are playing an increasingly important role in mineral exploration. By flying at low altitudes and accessing areas that are sometimes difficult to reach on the ground, these unmanned aerial vehicles (UAVs) make it possible to collect geophysical data while reducing, in certain contexts, the need for manned aircraft and some field operations.

The environmental benefits of these platforms are partly due to their electric propulsion. For comparison, a study conducted in a mountain rescue context estimates the emissions of an electric drone at 250 to 500 g of CO₂ for 40 minutes of flight, compared with 720 kg for a typical 50-minute helicopter mission [1]. These figures are not specific to mineral exploration, but they illustrate the potential difference between these two types of platforms.

The challenge, therefore, is to better characterize the subsurface while limiting, whenever possible, the environmental footprint associated with the early stages of exploration.


Geophysical Surveys in the Mineral Exploration Process

Geophysical surveys make it possible to characterize the subsurface based on its physical properties, without having to directly disturb the rock at every stage. They can therefore help identify areas of interest and better guide subsequent exploration activities, particularly drilling [2].

Investigating the Subsurface Without Disturbing It

Geophysics measures the contrasts between a potential mineral deposit and the surrounding rocks. The main properties studied include magnetic susceptibility, conductivity, resistivity, chargeability, radioactivity, density, and seismic velocity [2].

These measurements provide different types of information about the structure and characteristics of the subsurface. Combining them with geological mapping, field observations, and drilling data helps refine the interpretation of an area.

Survey Platforms: From Ground to Air

Once the properties to be measured have been determined, the choice of geophysical survey platform influences the area covered, data resolution, and acquisition conditions. Surveys can be conducted directly on the ground or from aircraft [2].

Airborne platforms can rapidly cover large areas, but the distance between the sensor and the ground affects the spatial resolution of certain measurements [3]. Geophysical drones occupy an intermediate position between ground-based surveys and conventional airborne systems. Their ability to fly at low altitudes without an onboard crew makes it possible to adapt data acquisition to certain difficult-to-access terrain while changing the logistical requirements associated with operations [3]. This flexibility explains the growing interest in UAVs for various mineral exploration applications.


Environmental Footprint: Documented Benefits and Underlying Mechanisms

The environmental benefits of drone geophysical surveys are primarily based on two aspects: the potential reduction of emissions associated with aerial operations and the decrease in certain physical interventions required on the ground. However, the extent of these benefits varies depending on the type of survey, the sensor used, and the methods the drone replaces.

Reducing Atmospheric Emissions: Drone vs. Helicopter

The most precise quantitative data available come from a study conducted in the context of mountain emergency medical services. Van Veelen and Strapazzon (2023) estimate that an electric drone produces between 250 and 500 g of CO₂ during a 40-minute flight, compared with 720 kg of CO₂ for a typical 50-minute HEMS mission [1].

In this specific context, the authors estimate that completely replacing a helicopter with a drone could reduce the carbon footprint by approximately 1,500 to 3,000 times [1]. This comparison does not concern mining geophysical surveys, but it illustrates the potential difference between a lightweight electric system and a conventional fossil-fuel-powered aircraft when their functions can be substituted.

Reduced Ground Disturbance

The environmental benefits of drones extend beyond emissions. Some ground-based geophysical surveys require the establishment of measurement grids, vegetation clearing, and, depending on the method used, the temporary installation of cables or wire lines for data collection [5]. Other exploration activities may also require more extensive line cutting.

Drone-based geophysical systems make it possible to collect certain types of data over terrain that is difficult to access from the ground, particularly cultivated areas and wetlands such as marshes. They can also be used over steep slopes or surfaces where ground travel is difficult or presents safety constraints [3].

In these situations, using drones can reduce the need for repeated ground crew movements, line cutting, or equipment installation in the field. However, ground operations may still be necessary for site reconnaissance, sampling, or data validation [3][4].


Data Quality and Operational Constraints

Beyond their operational and environmental benefits, drone geophysical surveys also stand out for their ability to acquire certain types of data at low altitudes. This proximity to the ground can improve the resolution of some measurements and make it easier to identify more localized geological variations.

Low-Altitude Flight and Spatial Resolution

In a study on UAV-based gamma spectrometry, Kunze et al. explain that conventional helicopter-borne radiometric surveys are generally conducted at altitudes of approximately 100 m or more. In contrast, the drones studied can fly just a few meters above the ground, while complying with terrain-specific safety requirements [3].

This difference is particularly important in radiometry. The farther the sensor is from the ground, the larger the area contributing to the recorded signal. At lower altitudes, this detector footprint becomes smaller, which can improve spatial resolution and help distinguish geological variations over shorter distances [3].

In this context, two concepts are particularly important:

  • Detector footprint: the area of ground that contributes to the signal measured by the sensor.

  • Spatial resolution: the ability to distinguish closely spaced variations or structures on the ground.


Integrating Aerial Data into Geological Interpretation

Drone-based data acquisition represents only one stage of a geophysical survey. Once collected, the data must be processed, compared, and placed within their geological context to produce a useful interpretation.

Depending on the methods used, several types of information can be combined. Photographic, multispectral, hyperspectral, or magnetic data can be analyzed using conventional methods or machine learning tools, then compared with geological mapping and field observations [4]. For electromagnetic and magnetic surveys, statistical processing and inversion techniques can also be used to better represent certain subsurface properties.

Geophysical data acquired by drones therefore form part of a broader set of information. Mapping, point measurements, and, when necessary, ground sampling help complement or refine geological interpretations [3][4].


Exploring Differently: The Growing Role of Drone Surveys

Drone geophysical surveys are part of the evolution of methods used to better characterize the subsurface while limiting certain field interventions. Their ability to acquire data at low altitudes, fly over difficult-to-access areas, and, in certain contexts, reduce the need for manned aircraft or ground operations makes them a complementary tool to traditional geophysical approaches.

These advantages do not mean that drones systematically replace other methods. Field validation, weather conditions, battery life, and regulatory requirements continue to influence survey planning. Their value lies instead in the ability to adapt data acquisition methods to the characteristics of each project.

For Squatex, the use of this type of technology is part of an approach aimed at better understanding Quebec's subsurface resources while seeking to limit the environmental footprint of the early stages of exploration.

To stay informed about advances in responsible exploration, follow Squatex on LinkedIn.

*Note: The data presented in this article are drawn from scientific literature and institutional sources. They describe drone geophysical surveys in general and do not necessarily reflect the equipment, methods, or performance specific to Ressources & Énergies Squatex.


References

[1] van Veelen, Michiel J., and Giacomo Strapazzon. "Green HEMS in Mountain and Remote Areas: Reduction of Carbon Footprint through Drones?" Scandinavian Journal of Trauma, Resuscitation and Emergency Medicine, vol. 31, 2023, article 36. Springer Nature, https://doi.org/10.1186/s13049-023-01099-5.

[2] Canadian Institute of Mining, Metallurgy and Petroleum. "CIM Mineral Exploration Best Practice Guidelines." CIM Mineral Exploration Best Practice Guidelines, 2018. Canadian Institute of Mining, Metallurgy and Petroleum, https://mrmr.cim.org/media/1163/cim-mineral-exploration-best-practice-guidelines-2018.pdf.

[3] Kunze, Christian, et al. "Development of a UAV-Based Gamma Spectrometry System for Natural Radionuclides and Field Tests at Central Asian Uranium Legacy Sites." Remote Sensing, vol. 14, no. 9, 2022, article 2147. MDPI, https://doi.org/10.3390/rs14092147.

[4] Jackisch, Robert, et al. "Integrated Geological and Geophysical Mapping of a Carbonatite-Hosting Outcrop in Siilinjärvi, Finland, Using Unmanned Aerial Systems." Remote Sensing, vol. 12, no. 18, 2020, article 2998. MDPI, https://doi.org/10.3390/rs12182998.

[5] Government of Ontario. "McFarlane Lake Mining Limited—Mineral Exploration Permit." Environmental Registry of Ontario, 2026. Government of Ontario, https://ero.ontario.ca/notice/026-0824.

Suivant
Suivant

Supercritical CO₂: Between Gas and Liquid, a State with Many Uses